Serving the Spokane area  ·  (509) 355-5690  ·  Open Mon-Sun 7am-7pm
📞 (509) 355-5690 Free Quote

Metal Roofing in Cheney, WA (99014) · Local Professionals

Spokane Metal Roofing · Fast response in Cheney and the Spokane area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cheney is a town where the housing stock tells a story, from the older farmhouses and early 1900s homes near downtown and Eastern Washington University to the mid-century ranches and newer builds spreading toward the edges of town. Lots are often generous, with mature pines and firs that drop limbs and needles, and the wind that sweeps across the Palouse hits roofs hard. If you live here, you know the snow can pile up and then melt fast, and that combo finds every weak spot in a roof.

That's why homeowners in Cheney (99014) call Spokane Metal Roofing. We're based in Spokane, just a short drive up I-90, and we've worked on everything from historic homes near the Cheney Historical Museum to modern builds out by the high school. We know the local building department, the permit process, and the kinds of roofs that hold up to Inland Northwest weather. When you need a metal roof that sheds snow and ice, we're the team to call.

Metal Roofing in Cheney (99014)

Cheney sits on rolling terrain with a mix of flat lots and sloped yards, and that affects how we handle drainage and access. Many properties have mature trees that drop debris, and the freeze-thaw cycles we get here can cause ice dams at the eaves if a roof isn't properly vented and insulated. Older homes often have multiple roof layers, which we have to account for when planning a replacement or a retrofit over shingles. And because Cheney gets its share of wind, we pay close attention to fastening patterns and panel attachment to make sure your roof stays put.

Our team has been serving Cheney and the surrounding Spokane area for years. We've replaced roofs on everything from small bungalows to large commercial buildings, and we understand the specific challenges of this climate. Whether it's a simple repair or a full standing seam installation, we bring the same level of care and craftsmanship to every job.

Our services in Cheney

How a Job Works in Cheney

Step 1: It starts with a phone call to (509) 355-5690 or a request through our website. We'll schedule a free on-site assessment at your convenience. Our estimator will inspect your current roof, take measurements, and discuss your options. You'll get a written estimate with clear pricing and no surprises.

Step 2: Once you approve the estimate, we'll pull the necessary permits from the City of Cheney and schedule your project. On installation day, our crew arrives early and gets to work. We protect your landscaping and keep the site tidy. If your home is in a historic district or under an HOA, we'll coordinate any required approvals before we start. We know that tight lots and steep driveways are common in some Cheney neighborhoods, so we plan for that.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the project with you to make sure you're satisfied, and we don't consider the job complete until you are. We leave your property clean and your new roof ready for the next storm.

Pricing for metal roofing in Cheney depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and snow guards start at $1,200. We always provide a detailed estimate after inspecting your roof, so you know exactly what to expect. Call (509) 355-5690 for a free estimate.

My house near Eastern Washington University has a steep roof and big pine trees. What's the best metal roofing option for that?
For steep roofs with tree cover, we often recommend standing seam or metal shingles because they shed debris well and are less prone to trapping needles. We'll assess your roof pitch and tree proximity during the free estimate and suggest the best profile and fastening system for your situation.
A windstorm just lifted some panels on my roof in Cheney. Can you help quickly?
Yes, we offer storm and wind damage repair with free inspections. Call us at (509) 355-5690, and we'll get out as soon as possible to secure the roof and prevent further damage. We work with your insurance company to document the damage.
What's the typical cost for a metal roof replacement on a 1,500 square foot ranch in Cheney?
For a 1,500 square foot ranch, a basic metal roof replacement might start around $13,500, but the exact price depends on the material, roof complexity, and whether we need to remove existing layers. We'll give you a precise quote after inspecting your home.
Do I need a permit from the City of Cheney for a metal roof replacement?
Yes, roofing permits are typically required for a full replacement. The City of Cheney Building Department handles these, and requirements can vary. We'll pull the permit for you and make sure the work meets all local codes.
My HOA requires approval for roof color. Can you help with that process?
Absolutely. We can provide color samples and documentation for your HOA's architectural review. If you're in a historic district, we'll also coordinate with the city to ensure compliance. Just let us know during the estimate.
Are you fully insured for work in Cheney?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Cheney?
We recommend an inspection every two to three years, especially after severe storms. Snow and ice can loosen fasteners or cause flashing issues. A quick inspection can catch small problems before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Spokane

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Spokane

All your work handled by qualified professionals in Spokane

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Spokane

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Spokane · Response within 24h · No commitment · ☎ (509) 355-5690

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Spokane ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm