Serving the Spokane area  ·  (509) 355-5690  ·  Open Mon-Sun 7am-7pm
📞 (509) 355-5690 Free Quote

Metal Roofing in Mead, WA (99218) · Local Professionals

Spokane Metal Roofing · Fast response in Mead and the Spokane area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mead is that stretch of north Spokane where two-story subdivision homes sit on generous lots and acreages still have room for a shop or a horse. If you live off Highway 2 near the Mead School District campus or up in the hills toward Mount Spokane, you already know winter hits harder here than down in the valley.

That is why homeowners in 99218 call Spokane Metal Roofing. We install, repair, and replace metal roofs built for heavy snow, ice dams, and the pine limbs that come down every windstorm. When the roof over your family room needs a real answer, we are the local crew that shows up.

Metal Roofing in Mead (99218)

Mead is not a flat grid of identical lots. You have newer two-story homes in subdivisions off Newport Highway and Mount Spokane Park Drive, older farmhouses on acreage out toward Peone Prairie, and plenty of properties with a steep pitch and deep eaves that shed snow fast. The ground here is glacial outwash and basalt, which means drainage is either very good or very strange depending on where the water goes. Tall ponderosa pines and Douglas firs surround many homes, so gutters fill with needles and debris, and a single ice dam at the eave can push water under the panels and into the ceiling. Metal shingle roofing and snow guards are a natural fit for these two-story homes because they handle the snow load and keep it from sliding off in a dangerous sheet over the driveway or front walk.

Our team has worked roofs across Mead and the surrounding Spokane area long enough to know which profiles hold up to our freeze-thaw cycles and which ones rattle loose after a few seasons. We do not guess. We look at your pitch, your access, your trees, and your snow pattern, then recommend the metal system that actually belongs on your house.

Our services in Mead

How a Job Works in Mead

Step 1: You call (509) 355-5690 or request a free estimate. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and decking, and talk through what you are seeing inside the house. You get a written scope and a clear price before anyone touches a panel.

Step 2: We handle the work. In Mead that often means coordinating with the Spokane County building department for the roofing permit, planning around HOA design rules in the newer subdivisions, and working carefully on narrow driveways or steep gravel access on the acreage properties. If your home is a retrofit over existing shingles, we verify the layer count and condition first, because code limits how many layers you can recover.

Step 3: We clean up. Magnets run over the lawn and driveway, debris hauled away, and a final walkthrough with you to check the flashing, the snow guards, and the gutter line. We leave your property clean and we do not disappear after the invoice.

Pricing in Mead depends on square footage, roof pitch, access, and how much repair work is underneath. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Metal shingle and stone-coated steel both start around $9 per square foot, while corrugated and ribbed panel roofing starts around $5.50. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight work around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs run about $9 per linear foot. Storm and wind damage inspections are free. Call (509) 355-5690 for a free estimate on your specific roof.

My two-story home near the Mead School District campus gets ice dams at the eaves every winter. Will a metal roof stop that?
A metal roof sheds snow faster than asphalt, but ice dams form when warm air escapes into the attic and melts snow that refreezes at the cold eave. We check your ventilation and insulation first, then recommend snow guards and proper underlayment at the eave. On many Mead homes, metal shingle roofing plus snow guards solves the problem without a full tear-off.
A pine limb came down on my roof off Mount Spokane Park Drive after a windstorm. How fast can you get out there?
We treat storm and wind damage as a priority. Call (509) 355-5690 and we will schedule a free inspection, tarp or secure the opening if needed, and give you a written repair scope. We work throughout Mead and the surrounding Spokane area, so we know the roads and the typical damage patterns.
What does a metal roof actually cost for a typical Mead acreage home with a steep pitch?
Most Mead homes we see run between $8 and $10 per square foot for installation or replacement, with standing seam at the higher end. Steep pitch, complex valleys, and tight access add labor. We give you a firm written estimate after walking the roof, not a phone guess.
Do I need a permit for a metal roof replacement in Mead, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in this area, and the rules vary by jurisdiction. We pull the permit and coordinate the inspection. We always confirm current requirements with the local building department before work starts, so you are not left holding an open permit.
My HOA in a newer Mead subdivision has design rules. Can you help with approval for a metal roof color and profile?
Yes. We provide product specs, color samples, and panel profiles for your HOA design review. If your property line is close to a neighbor, we also respect setback and drainage rules so runoff does not cross the line. We have worked with enough Mead subdivisions to know what boards typically ask for.
Are you insured for work on my Mead property, and what does that cover?
We are fully insured with general liability and workers' compensation coverage. That protects your home and your property if anything goes wrong on the job. We are happy to provide proof of insurance before we start.
What maintenance does a metal roof need in Mead's snowy winters and dry summers?
Keep the gutters clear of pine needles and fir debris, especially before snow flies. Check fasteners and seals every few years, and have us inspect the flashing around chimneys and skylights. Snow guards should be checked after heavy snow seasons. A quick annual inspection is far cheaper than a leak repair in January.
Why choose us?

Trusted professionals in Spokane

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Spokane

All your work handled by qualified professionals in Spokane

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Spokane

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Spokane · Response within 24h · No commitment · ☎ (509) 355-5690

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Spokane ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm