Serving the Spokane area  ·  (509) 355-5690  ·  Open Mon-Sun 7am-7pm
📞 (509) 355-5690 Free Quote

Metal Roofing in Suncrest, WA (99026) · Local Professionals

Spokane Metal Roofing · Fast response in Suncrest and the Spokane area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Suncrest sits on the hills above the Spokane River's Nine Mile Falls, where pine-covered slopes and winding roads define the neighborhood. The mix of 1970s ranches, 1990s two-story homes, and newer hillside builds means roofs here face heavy snow, pine needles, and the occasional ember from a summer wildfire. If your roof is showing its age, we can help.

Homeowners in Suncrest (99026) call Spokane Metal Roofing because we know how local conditions punish a roof. From the deep snow loads that sit on north-facing slopes to the wind that funnels through the river valley, we have seen what works and what does not. We are based in Spokane and serve Suncrest and the surrounding areas, so we are never far away when you need us.

Metal Roofing in Suncrest (99026)

Suncrest is built on a hillside, and that changes everything about roofing. Many homes have steep driveways and tight lots, so staging materials and getting equipment to the roof takes planning. The soil is a mix of basalt and glacial outwash, which can shift with freeze-thaw cycles and affect how a roof settles. Pine and fir trees are everywhere, dropping needles that trap moisture and debris, and their limbs are a real threat in windstorms. The long snowy winters mean ice dams form at the eaves, especially on homes with lower roof pitches. We often recommend standing seam metal roofing for its ability to shed snow, and stone-coated steel roofing for its resistance to fire and ember intrusion, both of which are common concerns in Suncrest.

Our team has worked on roofs throughout Suncrest and the Spokane area, from the older ranches near the river to the newer construction up the hill. We understand the local building department's permit requirements and can help you navigate them. Whether you need a full replacement or a repair after a storm, we bring the same attention to detail and local knowledge to every job.

Our services in Suncrest

How a Job Works in Suncrest

Step 1: It starts with a call to (509) 355-5690 or a request through our website. We schedule a free on-site assessment at your Suncrest home, where we inspect your roof, discuss your options, and provide a written estimate. We will also check for any signs of damage that might not be obvious from the ground.

Step 2: Once you approve the estimate, we schedule the work. In Suncrest, tight hillside lots and steep driveways can affect how we stage materials, so we plan ahead. If your home is in an HOA or a historic district, we help you get the necessary approvals. We also pull the required permits from the local building department and coordinate inspections.

Step 3: After the work is done, we clean up thoroughly. We use magnetic sweeps to pick up nails and debris, and we walk the property with you to make sure you are satisfied. We do not consider a job complete until you are happy with the result.

Pricing for metal roofing in Suncrest depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a precise quote, call us at (509) 355-5690 to schedule a free estimate. We will give you a clear, written price with no surprises.

My Suncrest home is on a steep hillside with tall pines. What roofing material is best for snow shedding and fire resistance?
For hillside homes in Suncrest with heavy snow and nearby pines, we often recommend standing seam metal roofing because its smooth surface lets snow slide off, reducing ice dam risk. Stone-coated steel roofing is also a great choice because it resists fire and ember intrusion, which is important with pine trees around. Both are durable and low maintenance. We can assess your specific roof pitch and tree coverage to recommend the best option.
A windstorm just knocked a pine limb onto my roof in Suncrest. Can you handle emergency repairs?
Yes, we handle storm and wind damage repairs in Suncrest. Call us at (509) 355-5690 and we will schedule a free inspection to assess the damage. We can tarp the area if needed and provide a repair estimate. We work with your insurance company to document the damage, but please note that coverage and deductibles are determined by your policy.
How much does a typical metal roof replacement cost in Suncrest?
For a typical Suncrest home, metal roof replacement starts at $9 per square foot, but the final cost depends on roof size, pitch, material choice, and whether any structural repairs are needed. We provide a free on-site estimate so you get an accurate number. Call (509) 355-5690 to schedule.
Do I need a permit for a metal roof in Suncrest, and how do I get one?
Yes, roofing permits are commonly required for a full replacement or re-roof in Suncrest. The requirements vary by jurisdiction, so we always check with the local building department (Spokane County or the City of Spokane, depending on your location) to confirm thresholds, fees, and inspection requirements. We handle the permit application process for you as part of our service.
My Suncrest HOA has design rules. Can you help with approval for a metal roof?
Yes, we can provide product specifications, color samples, and installation details to submit to your HOA for approval. We recommend getting HOA approval before scheduling the work. If there are property line concerns, we follow local setback rules and can coordinate with neighbors if needed.
Are you fully insured for roofing work in Suncrest?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident.
What maintenance should I do on my metal roof in Suncrest to prevent ice dams?
In Suncrest, ice dams form when snow melts and refreezes at the eaves. Keep gutters clear of pine needles and debris, and consider installing snow guards or heat cable in problem areas. We offer snow guard installation starting at $1,200. Regular inspections, especially before winter, can catch loose fasteners or sealant issues early. Call us at (509) 355-5690 to schedule a maintenance check.
Why choose us?

Trusted professionals in Spokane

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Spokane

All your work handled by qualified professionals in Spokane

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Spokane

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Spokane · Response within 24h · No commitment · ☎ (509) 355-5690

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Spokane ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm