Serving the Spokane area  ·  (509) 355-5690  ·  Open Mon-Sun 7am-7pm
📞 (509) 355-5690 Free Quote

Metal Roofing in Spokane, WA (99201) · Local Professionals

Spokane Metal Roofing · Fast response in Spokane and the Spokane area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Spokane's South Hill and Browne's Addition are full of 1890s to 1920s Victorian and Craftsman homes with steep gables and deep eaves, while the Northside and Hillyard are packed with 1950s to 1970s ranches on low-pitch shingle roofs. That mix of old and mid-century housing, plus heavy snow, ice dams and freeze-thaw, is exactly why we started Spokane Metal Roofing here and not somewhere else.

If you live near Manito Park or up on Five Mile Prairie and your roof is leaking at a seam or shedding granules into the gutter, call us at (509) 355-5690. We know the housing stock in 99201 and the surrounding ZIPs, and we show up ready to talk standing seam, metal shingle or a retrofit over your existing shingles.

Metal Roofing in Spokane (99201)

Spokane sits on the Spokane River and its falls, over basalt and glacial outwash soil, with tall ponderosa pines and maples dropping limbs and needles onto roofs all year. On the South Hill, steep Victorian gables and deep eaves mean ice dams form fast at the eave line, and a low-pitch ranch roof on the Northside can pond water if the fasteners and seams are not right. We deal with tight lots in Browne's Addition, where staging a crew and a dumpster takes planning, and with newer subdivision homes in Liberty Lake and Mead where HOA color and profile rules apply before we order a single panel.

Our team handles standing seam, metal shingle, stone-coated steel and corrugated panel roofing across Spokane and the surrounding areas, and we know how snow guards and ice protection perform after a February thaw. Whether it is a 1920s brick Tudor near Rockwood or a split-level in the Valley, we match the system to the roof pitch, the snow load and the way your gutters drain.

Our services in Spokane

How a Job Works in Spokane

Step 1: You call (509) 355-5690 or send a request, and we schedule a free on-site assessment. We look at the roof, the attic if you have access, the flashing around chimneys and skylights, and we tell you straight whether a repair, a replacement or a retrofit over your shingles makes sense.

Step 2: We pull the roofing permit through the local building department, coordinate with your HOA if you are in a subdivision with design review, and order panels. On tight South Hill lots we plan material drops and parking so we are not blocking your neighbor's driveway, and we protect landscaping from falling debris.

Step 3: When the work is done, we magnet-sweep the yard and driveway for screws and metal shavings, haul away old shingles, and walk the roof and gutters with you. We leave your property clean and show you photos of the finished seams and flashing.

Pricing in Spokane depends on roof size, pitch, access and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney or skylight work at $600. Snow guards and ice protection start at $1,200, and metal roof coating starts at $2.50 per square foot. Steep Victorian roofs, multiple layers of old shingles, or tight access in Browne's Addition can move the number, so we give you a written estimate after we see the roof. Call (509) 355-5690 for a free estimate.

My 1920s Craftsman on the South Hill gets ice dams at the eaves every winter. Will a metal roof fix that?
A metal roof sheds snow faster than shingles, but ice dams form when warm attic air melts snow that refreezes at the cold eave. We usually pair a metal roof with proper attic ventilation and snow guards or ice protection at the eave line, and we check the flashing and gutter pitch while we are up there. On steep gables near Manito Park, that combination makes a real difference.
A windstorm just peeled back panels on my Northside ranch. How fast can you get out?
Call (509) 355-5690 and we will schedule a free storm and wind damage inspection. We can tarp or secure an active leak the same day when possible, then document the damage for your insurance claim. We never promise coverage, but we give you photos and a written scope you can send to your adjuster.
What does a typical metal roof replacement cost in Spokane?
Most replacements start around $9 per square foot, with standing seam closer to $10 and retrofits over shingles around $7. A 1,500 square foot ranch roof is a different number than a steep Victorian with three gables. Size, pitch, number of old layers, access and flashing work all move the price, so a free on-site estimate is the only way to get it right.
Do I need a permit for a metal roof in Spokane?
Full replacements and re-roofs commonly require a roofing permit, and thresholds, fees and inspection requirements vary by jurisdiction. We pull the permit and schedule inspections as part of the job. You can check the City of Spokane website for current local rules, and we always defer to the building department on what applies to your address.
My HOA in Liberty Lake has design rules. Can you help with approval before we order panels?
Yes. We provide panel profile and color samples and a short description of the system for your HOA design review, and we wait for written approval before ordering. On property line questions, Spokane rules on setbacks and drainage apply, and we keep panels and downspouts on your side of the line so you do not create a neighbor issue.
Are you insured for work on my Spokane property?
We are fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong on the roof or on the ground.
What maintenance does a metal roof need in Spokane's climate?
Check fasteners and seams each fall before the snow, clear pine needles and maple leaves from valleys and gutters, and look at the flashing around chimneys and skylights. After a heavy winter, a spring inspection catches loose snow guards or backed-out screws early. We offer free estimates on inspections and can re-fasten or replace screws before a small issue becomes a leak.
Why choose us?

Trusted professionals in Spokane

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Spokane

All your work handled by qualified professionals in Spokane

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Spokane

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Spokane · Response within 24h · No commitment · ☎ (509) 355-5690

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Spokane ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm