Serving the Spokane area  ·  (509) 355-5690  ·  Open Mon-Sun 7am-7pm
📞 (509) 355-5690 Free Quote

Metal Roofing in Town and Country, WA (99251) · Local Professionals

Spokane Metal Roofing · Fast response in Town and Country and the Spokane area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Town and Country is a quiet pocket of mid-century ranches and split-levels just north of Spokane, where wide lots, mature pines, and low-pitch roofs define the neighborhood. Many of these homes still wear their original shingle roofs, now decades past their prime and due for a metal upgrade.

Homeowners in Town and Country (99251) call Spokane Metal Roofing because we understand the specific demands of these older homes: tight attic spaces, settled framing, and the need for a roofing system that handles heavy snow and freeze-thaw cycles. We are your neighbors, based in Spokane and familiar with the streets around the YMCA and the Town and Country shopping district.

Metal Roofing in Town and Country (99251)

Town and Country sits on gently rolling terrain with glacial outwash soils, which can shift slightly over time and affect roof alignment. The neighborhood's mid-century ranches often have low-slope roofs that are prone to ice damming at the eaves, especially after heavy snowfalls followed by quick thaws. Many homes have mature ponderosa pines nearby, and falling limbs are a common cause of punctures and flashing damage. We also see wind-lifted panels on older metal roofs that were installed with inadequate fasteners.

Our team has worked on numerous homes in Town and Country and the surrounding Spokane area, from simple repairs to full replacements. We know the local building department's permitting process and can guide you through it. Whether you need a leak fixed or a new standing seam roof, we bring experience and local knowledge to every job.

Our services in Town and Country

How a Job Works in Town and Country

Step 1: Call us at (509) 355-5690 or request a free estimate online. We will schedule an on-site assessment at your convenience, inspect your current roof, discuss your options, and provide a detailed written estimate. We will also check for any permit requirements with the city.

Step 2: Once you approve the estimate, we schedule the work. For most Town and Country homes, access is straightforward, but we always plan for safe material staging and protect your landscaping. If your home is in an HOA, we can help coordinate approval of panel profiles and colors. We handle the permit application and inspections as needed.

Step 3: After installation, we clean the site thoroughly, using magnets to pick up stray screws and nails. We walk you through the finished roof, explain the warranty, and make sure you are completely satisfied. We leave your property clean and your roof ready for decades of service.

Pricing for metal roofing in Town and Country depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, expect starting prices around $450 for leak fixes, and screw replacement and re-fastening from $750. We provide free estimates so you can get an accurate quote for your specific home. Call us at (509) 355-5690 to schedule yours.

My ranch home in Town and Country has a low-pitch roof that gets ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow more effectively than shingles, especially when paired with proper underlayment and ice-and-water shield at the eaves. We often recommend standing seam for low-slope sections because it has fewer fasteners and better snow-shedding. We can also install snow guards to prevent sudden snow slides.
A storm just blew through Town and Country and lifted some panels on my metal roof. How quickly can you respond?
We prioritize storm damage calls. Call us at (509) 355-5690 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What is the typical cost to replace a shingle roof with metal on a 1,500-square-foot ranch in Town and Country?
For a basic corrugated or ribbed panel roof, you might start around $8,250 (1,500 sq ft x $5.50 per sq ft). Standing seam would be higher, starting around $15,000. Factors like roof pitch, number of penetrations, and removal of old shingles affect the final price. We give free estimates.
Do I need a permit to install a metal roof in Town and Country?
Yes, a roofing permit is typically required for a full replacement or re-roof. The exact requirements and fees are set by the local building department. We handle the permit application and inspections for you, ensuring the work meets code.
My HOA has design guidelines for roof color and style. Can you help with approval?
Absolutely. We can provide product samples and specifications to submit to your HOA. We are familiar with common HOA requirements in the area and can recommend metal roofing options that meet both aesthetic and performance standards.
Are you fully insured for roofing work in Town and Country?
Yes, we carry general liability insurance and workers' compensation coverage for all our employees.
What maintenance does a metal roof need in Town and Country's climate?
We recommend an annual inspection, especially after winter, to check for loose fasteners, debris accumulation, and sealant condition. Cleaning gutters and removing pine needles and leaves helps prevent water backup. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Spokane

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Spokane

All your work handled by qualified professionals in Spokane

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Spokane

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Spokane · Response within 24h · No commitment · ☎ (509) 355-5690

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Spokane ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm